t: +44 (0) 23 8064 2571

e:  info@charntec.co.uk

Exatron Tape & Reel Systems

Model 1010 Manual Taping System


1010-Taper-20130813_web.jpgThe Model 1010 Manual Tape and Reel is designed for low to mid-volume engineering and production environments. It comes standard with pocket counter, dual digital sealing-head temperature controllers, foot-operated advance pedal, a clean ESD-safe work surface, and vacuum wand.



1010cpanel.jpgThe Model 1010 must be hand-fed by an operator from either tubes or trays. Carrier tape motion can be continuous or intermittent, controlled by the foot pedal.



PSA and thermal sealing.

Easily adjust from 8mm to 72mm tape with the turn of a precision knob.

1010blockbottom_Edited.jpgUnique tape guide aligns cover to carrier tape perfectly in seconds, guaranteed. No micro-adjustments, no wasted tape.

Precision seal head temperature and pressure control.

Drag sealing method.

Easy loading, ESD-safe work surface.

Stand-alone operation, no computer required (PC optional).

Solid construction, provides years of service2 year warranty.

Multiple options and upgrades.


Additional Features:

Bench top base, bolt pattern for 1010BlockTaper.jpgmachine integration.

Precision knob adjusts tape width, 2mm per turn.

1 size tape guide block of choice included.

Quickly adjustable seal blades, no tools required.

Easy to clean/change seal blades.

Overtemp thermal protection built into each head.

Independent + 2 C temp control.

Independent seal heads use dead weights for precision drag seal pressure.
Not affected by supply air pressure changes.

Heavy duty powered take up reel with slack/tension switch.

Foot pedal advance.

Tape advance override switch.

Adjustable tape speed.

Total pocket counter with fiber optic sensor.

Stop on full count.

Built-in quick air disconnect for vacuum wand/air blow-off.

ESD safe - built-in ESD wrist strap attach point.

Seal heads default up on power and/or air supply failures.

CE marked.

Lifetime spare parts and service available.

Excellent user manual.

Customer self-service encouraged, no void warranty stickers.

Spare parts shipped same day, typically.

Built in the USA.



Size: 60" x 16" x 16".

Work Area: 9.5" x 15".

Weight: 55 lbs.Power: 100-120 VAC 60 Hz or 220-240 VAC 50 Hz @ 240 Watts.

Air: 1 CFM 60 PSI clean, dry air.

Tape width: 8mm to 72mm.

Tape pitch: Automatically counts pockets of any pitch, no adjustments required.

Takeup Reel size: 7" to 22".

Carrier tape: All type.

Cover tape: PSA and heat activated.





PSA Only (Model 1005, lower cost).

Tape guide blocks: 8,12, 16, 24, 32, 44, 56, 72, and custom sizes available (120mm max to date).

Left hand mounted feed reel available.

Windows 7 laptop-controlled upgrade, includes servo motor drive.

In pocket vision - Pin1, empty/out of pocket, upside down - many inspection upgrades available.

DSC05290.jpgVision upgrade bolts to taper in field, shipped pre-wired as needed.

Fiber-optic empty/out of pocket detection.

Seal blades of any width.

Triple seal (requires sample to confirm).

Solenoid-driven seal heads, allows operation with no compressed air.

Vacuum wand.

ESD wrist straps.

Powered cross-reel feeder.

Stretch versions available, exposes more tape pockets (16" standard).


Please contact us for more information.

Back to Top